Recommended linear vibrating screen for rubber powder screening

2023-04-18

Pageviews:

Rubber powder is widely used in the waterproof building materials industry, such as school stadium runways, highways, and airstrips. The raw materials for these productions are rubber powder, which is used in the fields of color composite rubber floor tiles, flame retardant materials, composite coatings, etc. The size, particle size and diameter of the rubber powder used is also different. Generally sieved rubber powder 40-60 mesh rubber powder belongs to the finer rubber powder, and it is more used in the filling of rubber products and plastic modification.
So how do you choose the model of vibrating screen equipment if you want to siev the 40-60 mesh rubber powder? Following up our previous successful case analysis, there are relatively more choices of linear vibrating screens. Let's take a look at the advantages of linear vibrating screens in screening 40-60 mesh rubber powder.

Customers who use the linear vibrating screen know that the linear vibrating screen can also be called a rectangular linear screen or a square screen. The equipment is operated by two identical motors in opposite directions synchronously. The vibration frequency throws the material up, and under the gravity of the material Before moving, the rubber powder larger than the mesh is directly discharged from a discharge port, and the material smaller than the mesh enters the next layer for screening, and finally the screening of the rubber powder is completed. The longer the trajectory of the rubber powder material on the screen, the higher the screening accuracy.
We also mentioned above that the customer wants fine rubber powder between 40 and 60 mesh. Then we can set up a layer of 40 mesh screen and another layer of 60 mesh screen. This is a double-layer linear vibrating screen. As long as the number of layers is determined, the same principle applies. Linear vibrating screens have wooden grids and steel grids. By default, steel grids are conventionally used, which increases the service life of the screen. In the screening process, in order to prevent the material from blocking the screen during the screening process, a bouncing ball is generally added under the screen, which better increases the penetration rate and also has the function of automatic cleaning. At the same time, manufacturers are required to add a dust cover when leaving the factory, and fully seal the production screening to ensure that the rubber dust will not rise, improve the working environment of workers, and be more environmentally friendly.

Last One: The characteristic of the circular vibrating screen is to ensure that the raw materials are evenly distributed and screened

2023-04-18

Next Article: Shaftless screw transports sludge efficiently

2023-04-19