DAYONG Vibrating Screen in casting sand and quartz sand
The linear vibrating screen adopts rubber vibration isolation spring, which has long service life, low noise, and smooth t roller passing through the resonance area. Ensure that a small clearance of 75mm shall be kept between the linear vibrating screen box and non moving parts such as hopper and chute. During the feeding process of the linear vibrating screen, if a sudden large amount of feeding occurs, the material on the screen surface will be thickened. The upper layer has been directly discharged without getting the mesh. In contrast, the feeding effect has been obtained but the screening purpose has not been solved. This situation often occurs during the manual feeding process. It is recommended to add a gate device at the feed inlet, which can flexibly adjust the size of the feed inlet to make the material get full mesh penetration on the screen surface.
The bottom of the screen frame of the linear vibrating screen is equipped with a bottom bracket, which is divided into several dry grids. Several rubber balls are placed in each grid to make it attack during vibration, which is consistent with the impact of screen cleaning. The phenomenon of stone eye-catching is handled. The opening and closing of the storage hopper are flexible, which can correctly adjust the flow of stones, evenly enter the screen and spread out, so that the screen can be relied on as much as possible. The screening and grading accuracy of stones and the screening and grading production capacity can be achieved. The linear screen, also known as linear vibrating screen, SZF linear vibrating screen, linear vibrating screen, rectangular linear screen, rectangular vibrating screen and multi-layer linear vibrating screen, is suitable for screening, grading, impurity removal and filtration of particles, with large processing capacity.
1. Screen box: It is welded by several steel plates with different thicknesses. It has certain strength and stiffness and is the main part of the screen machine.
2. Screen frame: It is made of pine wood or wood with small deformation, mainly used to keep the screen flat and reach normal screening.
3. Screen: There are several kinds of screens, such as low carbon steel, brass, bronze, stainless steel wire, etc.
4. Vibrating motor (see the operating manual of the vibrating motor for the use and maintenance methods).
Electromagnetic Sieve Shaker Rotary Vibrating Screen Ultrasonic Vibrating Screen Linear vibrating screen Sieve Shaker Swing Tumbling Screen 450 Filter Sieve Square Gyratory Screen Drum Trommel Screen Plane Gyratory Screen Direct Dishcarge Sifter Scraper Vibrating Screen High Frequency Vibrating Screen Airflow Screening Machine
.jpg)
