Reasons And Solutions for Blockage of Aluminum Powder Vibrating Screen
2022-12-30
Share:
So what is the method to prevent the aluminum powder vibrating screen from blocking the particles?
When the aluminum powder vibrating screen is in normal operation, due to the various characteristics of the material, the shape of the material will cause various forms of sieve hole blockage. After analysis, the main reasons for the blockage of the sieve are as follows:
1. The aluminum powder vibrating screen contains a large number of particles close to the separation point;
2. The material of the aluminum powder vibrating screen has a high water content;
3. Spherical particles or materials with multiple contact points to the sieve holes;
4. Static electricity will occur;
5.Materials with fibrous materials.
Because most of the material particles that need to be screened by the aluminum powder vibrating screen are irregular, the reasons for the blockage are also various. When the moisture in the material is greater than 5%, if the material is dried unconditionally, the screen surface and the screen hole should be selected. When the moisture is greater than 8%, wet screening should be used. For materials with more flake particles, it is necessary to change the material crushing method and the particle size matching of different crushing methods and processes.
